Станция смазки серии CEN25-03
1.CEN24, CEN25 types are without timer, also could be controlled by Programmable Logic Controller (PLC).
2.The выходн. volume is stable and can be adjusted by the pressure-regulating valve. Turning the valve clockwise, the oil volume will increase, and turning anticlockwise, the oil volume will reduce.
3.When the power of the lubricator turns off, the air pressure and output power will be turned off at the same time for safety.
4.It has a pressure-regulating valve, which can adjust the pressure and easy to check from the манометр.
5.It has a float switch that can detect the oil volume. It will have abnormal signal automatically when the oil level is lower than the minimum.
6.The function of CEN24, CEN25 types are similar to CEN22 (Horizontal), CEN23 (Vertical) types. The difference is CEN24, CEN25 types are without timer, and CEN22, CEN23 types are with timers.
Application of Machines Equipment
The oil-mist type electric lubricator has cooling, lubricative and filtering effect, which can reduce wear of lubrication point. It's suitable for cutting machines and bearings.
| Модель | Время вкл. | Интервал работы | Двигатель, Вт | Макс. подача | Макс. давление | Напряжение, В | Ток, А | Частота, Гц | Диаметр вых. отверстия | Манометр | Вязкость масла |
| CEN24 Horizontal / CEN25 Vertical | 1-999 sec | 1-999 sec/min | 25W | 200 см3/мин | 15 кгс/см2 | 110 или 220 | 2.5 или 1 | 60 или 50 | 4 или 6 | опция | 32-68cSt@40℃ |
| Модель | Объем бака | Напряжение | Вых. Отверстие | Тип включения |
| CEN24/25 | 03: 3л (пластик) | С: 220В, 60Гц | 2: 4мм (с манометром) | |
| 04: 4л (пластик) | 3: 6мм (с манометром) |
предложение широкого ассортимента обрабатывающего оборудования и оснащения к нему.