Станция смазки серии CEF
1.CEF type is circulating lubricator, which means the oil flows out, then comes back into the oil Бак through the cyclic Вход.. The cyclic Вход. has magnetic filter, which can block the impurities and assure the oil clean.
2.The timer controls the operation and interval time. The electronic box has operation, interval and abnormal indicators.
3.It has a feed-oil button, press the button and the oil will feed immediately.
4.After installing and connecting the piping, press the “feed-oil button” till the oil flows out, then start to use it.
5.It used a high quality alloy steel gear pump and induction motor that not only has steady output pressure and low noise, but also can assure each lubrication point with output of oil. It can be applied for large machines' request.
6.It has a pressure-regulating valve and манометр, where an operator can adjust the pressure and check the pressure easily.
7.It has a float switch that can detect the oil volume. It will have an automatic signal automatically when the oil level is lower than the minimum.
Application of Machines Equipment
1.The circulating type electric lubricators could save the usage volume of oil, and have large выходн. volume. 2.Circulating type lubricators also have cooling, lubricative and filtering effect, which can reduce wear of
lubrication point. It's suitable for machinery requiring large выходн. volume or quickly operating
|
Модель |
Act Time |
interval Time |
Motor |
Max Volume |
Max Pressure |
Напряж. |
Ampere |
Hertz |
выходн. Отв. |
Pressure-Relief |
Cycle вход. |
Oil вязкость |
|
COA |
3 sec-3 min |
1-60 / 1-180/ 1-360 min |
25W |
250 cc/min |
15kgf/cm2 |
110V 220V |
0.7A 0.25A |
50/60Hz |
Ø4 or Ø6 |
○ |
1/2" or 3/4" (inch) |
32-68cSt@40℃ |
|
60W |
500 cc/min |
30kgf/cm2 |
110V 220V |
1A 0.65A |
|
Модель |
Бак код |
Бак Матер. |
вместим. Литры |
Креп.отв. расстояние(mn) |
длина (mm) |
Ширина (mm) |
Высот. (mm) |
Масса (kg) |
|
CEF (25W) |
05 |
аллюм |
4L |
280 |
304 |
172 |
275 |
7.50 |
|
08 |
сталь |
8L |
338 |
355 |
190 |
305 |
10.10 |
|
|
12 |
сталь |
12L |
475 |
495 |
220 |
345 |
12.40 |
|
|
Модель |
Бак код |
Бак Матер. |
вместим. Литры |
Креп.отв. расстояние(mm) |
длина (mm) |
Ширинa (mm) |
Высот. (mm) |
Масса (kg) |
|
CEF (60W) |
08 |
сталь |
8L |
338 |
355 |
190 |
340 |
11.15 |
|
12 |
сталь |
12L |
475 |
495 |
220 |
380 |
13.45 |
предложение широкого ассортимента обрабатывающего оборудования и оснащения к нему.